4 Steps of the Water Mitigation Process

9/30/2019 (Permalink)

Water restoration in a New Hope, PA office building

4 Steps of the Water Mitigation Process

Your commercial property in New Hope,PA, is likely well maintained. Buildings with even the most vigilant of owners, however, can still have the occasional water damage issue. If you need pipe burst cleanup, it is best to call water restoration experts to do the job. They have the training and experience necessary to work through the steps of the mitigation process smoothly.

1. Assess the Problem

Even a small problem such as a supply line leaking can cause damage to the flooring and wall around it. If it goes on for a while, it may even leak to the lower floors through the ceiling. The first thing technicians do when they arrive is assess the problem so they can give you an estimate of the time it will take to finish and how much it is likely to cost.

2. Tear Out Damaged Materials

With any luck, pipe burst cleanup only consists of taking out damp insulation and a little drywall. If cabinets or flooring are warped by the water damage, though, they may have to be removed as well. Technicians take out everything that cannot be salvaged.

3. Dry Affected Area

To prevent secondary damage, water cleanup professionals must make sure every remaining surface is dry. They may need to pump water out or use industrial fans to increase air flow. This can keep mold from growing on the salvageable materials.

4. Rebuild Structure

The amount of restoration work that has to be done depends on how much material had to be removed. The restoration process can be as simple as replacing a few floor tiles or rebuilding a whole section of your property.
If you need pipe burst cleanup, it is important to contact restoration professionals as quickly as possible. The sooner you call, the less damage your leaky pipes or supply lines can cause, and the less likely you are to have secondary damage.